3-Axis DSP Based Digital Stepper Drive Max 60 VDC / 6.0A
DUAL 数据表, Datasheet (PDF) - Integrated Device Technology - IDT72V8109 Datasheet, 3.3 Volt CMOS DUAL ASYNCHRONOUS FIFO DUAL 512 x 9, DUAL 1,024 x 9 DUAL 2,048 x 9, DUAL 4,096 X 9 DUAL 8,192 X 9.
Download datasheetDownload datasheet (Leadshine)
Drivers Zf Electronics Gmbh Input Devices Inc
Download driver softwareHardware Installation Manual for MX3660.- ZF Electronics TVS India Private Limited Formerly named as TVS Cherry Private Limited is a joint venture between TVS Group India and ZF Electronics Corpora.
- Update Interlink Electronics VersaPad input device drivers for free.
The Leadshine MX3660 is a high performance 3-axis stepper drive with built-in breakout board and I/O’s based on the latest DSP technology. It is specially designed for EASY and RAPID control of up to three 2-phase (1.8°) in frame sizes NEMA 17, 23, and 24. The MX3660 3-axis stepper drive operates under 20-60 VDC input voltage and can output up to 6.0A current (peak of sinusoidal) per axis. It takes step & direction control and is easy to implement for OEM applications.
By adopting Leadshine advanced stepper motor control technology, the MX3660 3-axis stepper drive can power stepper motors in high precision, at extra smoothness, and with extra low motor heating & noise. It is featured with anti resonance, multi-stepping, vibration suppression, input command smoothing, 50% idle current reduction, etc.
The MX3660 3-axis stepper drive is easy to configure. Via the 6-pin DIP switch of each of the 3 stepper drive modules, a user can easily set the output current and micro step to one of their 8 available settings, 1.45-6.0A and full step - 1/64 respectively. Each axis can have its own current & micro step configurations to satisfy different requirements for the controlled stepper motor. For example, a user can set axis X at 8 micro steps & 6.0A for a NEMA 34 motor, axis Y at 10 micro steps & 4.25 A for a NEMA 24 motor, and axis Z at 16 micro steps & 1.41A to for a NEMA 17 motor.
The MX3660 3-axis stepper drive is integrated with a breakout board with a DB25 connector and built-in I/O’s. This allows convenient, easy and quick connection for controllers (e.g. PC-based control systems, motion controllers, PLC’s…) and external devices (limit switches, VFD…). It simplifies system setup, save installation space & time, minimize wiring, increase reliability, and cut costs. In addition, the MX3660 offers a built-in digital “smoother” to allow filtering/smoothing of 'noise' pulses for better system performance (application dependant).
- Power up to 3 stepper motors of NEMA 17, 23, 24
- Option to 4th axis
- Sophisticated stepper motor control based on the latest DSP technology
- Built-in breakout board and I/O’s
- Step & direction Control
- 200 KHz maximum frequency for each axis
- 20 - 60 VDC supply voltage
- 1.41 - 6.0A output current per axis
- 8 micro step settings: 1, 1/2, 1/4, 1/8, 1/10, 1/16, 1/32, 1/64
- 8 output current settings of 1.41 - 6.0A for each axis
- Damping and anti resonance
- Allowing individual output current & micro step settings for each axis
- Input pulse smoothing for less jittering, higher torque, and quicker response
- Extra low motor heating & noise
- Extra smooth motor movement
- Simple micro step & output current configuration via DIP switches
- Fault output
- 50% automatic idle current reduction
| Parameters | Min | Typ. | Max | Unit |
| Input Voltage | 20 | 48 | 60 | VDC |
| Continuous Current | 0 | - | 6.0 (peak) | A |
| Pulse Input Frequency | 0 | - | 200 | kHz |
| Pulse Voltage | 0 | 5 | 5 | V |
| Logic Signal Current | 7 | 10 | 16 | mA |
| Isolation Resistance | 100 | 0 | 0 | Ω |
| Parameters | Values. |
| Input Voltage | 20-60VDC |
| ESTOP, Input1, Input2, Input3, Input4 | Optical Isolation,12V Source,10mA MAX |
| Output1, Output2, Output3, Output4 | Optical Isolation, 24V, 70mA MAX |
| 0-10V Analog Output | 0.9 to 8.9V, 20mA MAX |
With integrated breakout boards and built-in IO’s, Leadshine MX3660 3-axis stepper drives can be easily implemented as general purpose stepper drives to power 3 two-phase stepper motors in frame size 17, 23, 24, and 34. They are ideal solutions to many applications with 2-3 axis stepper systems such as CNC machinery, electronics, semiconductors, medical, packaging, lab automation, etc. They can be easily adopted in stepper control systems for machines like CNC routers / engravers, light-duty CNC mills, CNC lathes / Cutters, laser cutters / markers / engravers, CNC welders, waterjet cutters, X-Y tables, CNC dispensing machines, medical equipments… The unique design of MX3660 with DB25 connectors makes it fit seamlessly with many popular CNC control systems like Mach3 and EMC.
Drivers Zf Electronics Gmbh Input Devices Download
A typical system consists of stepper motor, stepper motor driver, power supply and controller. The following image shows a typical connection schematic:
Drivers Zf Electronics Gmbh Input Devices
As in previous editions different topics are covered in a concise but descriptive way backed up by diagrams, graphs, photographs and tables enabling the reader to better comprehend the subject. This fifth edition revises the classical topics of the vehicle electrical systems such as system architecture, control, components and sensors. There is now greater detail on electronics and their application in the motor vehicle, including electrical energy management (EEM) and discusses the topic of inter system networking within the vehicle. It also includes a description of the concept of hybrid drive a topic that is particularly current due to its ability to reduce fuel consumption and therefore CO2 emissions.This book will benefit automotive engineers and design engineers, automotive technicians in training and mechanics and technicians in garages. It may also be of interest to teachers/ lecturers and students at vocational colleges, and enthusiasts.